Getting started
Every program here comes as a pack image (.opk): a copy of a whole Datapak, Rampak or Flashpak. You can run it in an emulator straight away, or put it onto a pack for a real Organiser. Released programs also have a source + build zip with the source, the same pack image, and a psion/ folder for loading over a Comms Link.
What you need
- For the emulator: a web browser and the Jape emulator, which runs the Organiser's own ROMs.
- For a real Organiser: a model the program supports (see its Compatibility table), and either a pack writer for the image, or a Comms Link cable and a PC program such as Psi2Win to send the files.
Running a program in an emulator
- Download the program's pack image.
- Open Jape and choose the model, such as LZ64.
- Select OPK file, choose the image, Create, then put it in Slot B.
- On the Organiser's main menu choose Prog, then Run, and type the name shown on the program's page, such as
B:C4.
Loading a program onto a real Organiser
There are two ways:
- Write the pack image to a Datapak or Flashpak of the size the program's page gives, with a pack writer.
- Load it with RPBOOT over a Comms Link. Download the source + build zip and use the
psion/folder inside the program's folder. In Psi2Win, set the folder topsion, runRPBOOTon the Organiser, and it copies the program onto a pack in B: or C:. DeleteA:RPLOADafterwards to free its RAM.
Which model do I have?
The model name is on the case, and the Organiser shows it when it starts.
| Model | RAM | Screen |
|---|---|---|
| CM | 8K | 2 lines of 16 characters |
| XP | 16K | 2 lines of 16 characters |
| LA | 32K | 2 lines of 16 characters |
| LZ | 32K | 4 lines of 20 characters |
| LZ64 | 64K | 4 lines of 20 characters |
Which file do I need?
| You want to | Download |
|---|---|
| Play in an emulator | The build (pack image, .opk) |
| Write a pack with a pack writer | The build (pack image, .opk) |
| Load over a Comms Link with RPBOOT | The source + build zip, for its psion/ folder |
| Read or change the code, or rebuild it | The source + build zip |
Each download lists its size in bytes and its SHA-256 checksum, so you can check the file arrived whole.
Troubleshooting
- "NEEDS" or "OUT OF MEMORY": the program needs more free RAM. Delete files you don't need from A:, or use a model with more memory.
- The program isn't found: check you typed the device letter of the slot the pack is in, such as
B:orC:. - The checksum doesn't match: download the file again.